 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters ctparts.com SPECIFICATIONS CTDD3220DF-D1.5K-3M Series Wide Input Isolated & Regulated 3W Output, Dual Output Part Number CTDD3220DF-0505-D1.5K-3M CTDD3220DF-0509-D1.5K-3M CTDD3220DF-0512-D1.5K-3M CTDD3220DF-0515-D1.5K-3M CTDD3220DF-1205-D1.5K-3M CTDD3220DF-1209-D1.5K-3M CTDD3220DF-1212-D1.5K-3M CTDD3220DF-1215-D1.5K-3M CTDD3220DF-1505-D1.5K-3M CTDD3220DF-1509-D1.5K-3M CTDD3220DF-1512-D1.5K-3M CTDD3220DF-1515-D1.5K-3M CTDD3220DF-2405-D1.5K-3M CTDD3220DF-2409-D1.5K-3M CTDD3220DF-2412-D1.5K-3M CTDD3220DF-2415-D1.5K-3M CTDD3220DF-4805-D1.5K-3M CTDD3220DF-4809-D1.5K-3M CTDD3220DF-4812-D1.5K-3M CTDD3220DF-4815-D1.5K-3M Vin Nom. (VDC) 5 5 5 5 12 12 12 12 15 15 15 15 24 24 24 24 48 48 48 48 Input Range (VDC) 4.5-9 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 9-18 12-24 12-24 12-24 12-24 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 Vin Max.* (VDC) 11 11 11 11 22 22 22 22 30 30 30 30 40 40 40 40 80 80 80 80 Vout (VDC) 5 9 12 15 5 9 12 15 5 9 12 15 5 9 12 15 5 9 12 15 Iout Max. (mA) 300 165 125 100 300 165 125 100 300 165 125 100 300 165 125 100 300 165 125 100 Iout Min. (mA) 30 16 12 10 30 16 12 10 30 16 12 10 30 16 12 10 30 16 12 10 Effi. Typ. (%) 65 67 70 72 70 73 77 79 75 79 80 81 78 80 81 82 76 81 81 82 Not shown at actual size. Compliant RoHS *If Input voltage above specified may cause permanent damage to the device ISOLATION SPECIFICATIONS FEATURES Efficiency: To 82% Temperature Range: -40C to +85C Isolation: 1.5KVDC Miscellaneous: Wide (2:1) Input Range. Dual Output. Metal Shielding Package. No heat sink required. Industry standard pinout. Samples available. Item Isolation Voltage Isolation Resistance Test Condition Flash tested for 1 minute Test at 500VDC MIN 1500 1000 TYP MAX Units VDC M OUTPUT SPECIFICATIONS Item 3W Output Power Positive voltage accuracy Negative voltage accuracy Load regulation Line regulation Temperature drift (Vout) Ripple Noise Switching frequency Switching frequency Refer to Recommended Circuit Refer to Recommended Circuit From 10% to 100% load Input Voltage from low to high Refer to Temp. Derating Graph 20Hz to 300KHz Bandwidth DC-20MHz Bandwidth 100% load, nominal input voltage 10% load, nominal input voltage 80 250 30 80 Test Condition MIN 0.3 1 3 0.5 0.2 TYP MAX 3 3 5 1 0.5 0.03 60 150 200 600 Units W % % % % %/C mVp-p mVp-p KHz KHz CHARACTERISTICS Output Short Circuit Protection: Continuous Temperature Rise at Full Load: 30C (Typ.) Cooling: Free air convection No Load, Power Consumption: 100mW (typical) Operating Temperature Range: -40C to +85C Storage Temperature Range: -55C to +125C Lead Temperature: 300C (1.5mm from case for 10 seconds) Storage Humidity Range: < 95% Case Material: Metal MTBF: >1,000,000 hours Miscellaneous: RoHS Compliant. Note: 1. All specifications measured at TA=25C, humidity<75%, nominal input voltage and rated output unless otherwise specified. TYPICAL CHARACTERISTICS Temperature Derating Graph 120 Output Power (%) 100 80 60 40 20 0 -40 0 120 40 71 85 Ambient Temperature (C) Safe Operating Area 01.04.07 Technologies Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright (c) 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL DC/DC Converters ctparts.com CTDD3220DF-D1.5K-3M Series Wide Input Isolated & Regulated 3W Output, Dual Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS CTDD3220DF-D1.5K-3M Package Bottom View Side View 31.80 0.50 10.0 1 2 3 10 11 12 15.24 24 23 22 15 14 13 20.30 2.00 5.08 4.00 27.94 Note: All pins on a 2.54mm pitch; all pin diameters are 0.50mm; all dimensions in mm. (Tolerance: 0.10) PIN CONNECTIONS Bottom View Pin 1 2 3 10 11 12 Function Vin GND -Vo +Vo 0V 24 23 22 15 14 13 1, 24 12, 13 2, 23 11, 14 10, 15, 3, 22 RECOMMENDED CIRCUIT All the CTDD3220DF-D1.5K-3M Series have been tested according to the following recommended testing circuit before leaving factory. This series should be tested under load. Never be tested under no load (See figure 1 & 2). If you want to further decrease the input/output ripple, you can increase capacitance properly or choose capacitors with low ESR. However, the capacitance should not be too high (See table 1). If you want to use the products in high EMI, please choose our metal packaged products. External Capacitor Table (table 1) Figure 2 Vin 5V & 12V 24V & 48V C in C out (0+70C) C out (-40+85C) Figure 1 Input Current (A) lp 100F 100F (electrolytic capacitor) 47F (tantalum capacitor) Vin +Cin Cout + + Vo+ 0V Vo- 10F GND DC DC Cout Input Voltage Range Input Voltage (V) 01.04.07 Technologies Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright (c) 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL |
Price & Availability of CTDD3220DF-0509-D15K-3M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |